✨ New Arrivals Just Dropped!Explore
HomeStore

BD Diesel Transmission 2007.5-2018 Dodge 68RFE 4WD w/ Torq Force Converter Package

1 / 8
+3

BD Diesel Transmission 2007.5-2018 Dodge 68RFE 4WD w/ Torq Force Converter Package

When you purchase a BD Transmission and Torque Converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity and case strength. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
  • BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • Billet forged front cover with thicker walls and stronger mounting pads
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Furnaced brazed turbine fins for improved fluid coupling efficiency
  • Over Drive clutches 33% increase & 2C clutches 33% increase
  • Heavy duty cam & roller design low reverse one way clutch
  • Ideal replacement for stock torque converter
  • Lower rpm response than the stock converter
  • Great for street and towing applications
  • High performance Enhanced stall stator
  • Upgraded Governor Pressure Transducer
  • Custom Big Stack overdrive shaft
  • Torque Convertor Enhanced Stall
  • BD reinforced accumulator plate
  • New 4C billet spring retainer
  • No Shuttle Shifting Problems
  • Stamped Forged 1 Piece Cover
  • Upgraded Governor Solenoid
  • More Efficient Operation
  • Good for 550 flywheel HP
  • Damper springs replaced
  • 11.625 inch dual-clutch
  • No Race Abuse Covered
  • Upgraded Valve body
  • Furnace Brazed Fins
  • PROFORCE CONVERTER:
  • Aluminum HD Pan
  • TRANSMISSION:

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2013-2018 Ram 2500 Big Horn
2011-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2011-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2012-2016 Ram 2500 Outdoorsman
2011-2018 Ram 2500 SLT
2011-2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2011-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2011-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2011-2018 Ram 3500 SLT
2011-2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman

When you purchase a BD Transmission and Torque Converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity and case strength. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
  • BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • Billet forged front cover with thicker walls and stronger mounting pads
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Furnaced brazed turbine fins for improved fluid coupling efficiency
  • Over Drive clutches 33% increase & 2C clutches 33% increase
  • Heavy duty cam & roller design low reverse one way clutch
  • Ideal replacement for stock torque converter
  • Lower rpm response than the stock converter
  • Great for street and towing applications
  • High performance Enhanced stall stator
  • Upgraded Governor Pressure Transducer
  • Custom Big Stack overdrive shaft
  • Torque Convertor Enhanced Stall
  • BD reinforced accumulator plate
  • New 4C billet spring retainer
  • No Shuttle Shifting Problems
  • Stamped Forged 1 Piece Cover
  • Upgraded Governor Solenoid
  • More Efficient Operation
  • Good for 550 flywheel HP
  • Damper springs replaced
  • 11.625 inch dual-clutch
  • No Race Abuse Covered
  • Upgraded Valve body
  • Furnace Brazed Fins
  • PROFORCE CONVERTER:
  • Aluminum HD Pan
  • TRANSMISSION:

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2013-2018 Ram 2500 Big Horn
2011-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2011-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2012-2016 Ram 2500 Outdoorsman
2011-2018 Ram 2500 SLT
2011-2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2011-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2011-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2011-2018 Ram 3500 SLT
2011-2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman
$2,780.10

Original: $9,266.99

-70%
BD Diesel Transmission 2007.5-2018 Dodge 68RFE 4WD w/ Torq Force Converter Package

$9,266.99

$2,780.10

Description

When you purchase a BD Transmission and Torque Converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity and case strength. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
  • BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • Billet forged front cover with thicker walls and stronger mounting pads
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Furnaced brazed turbine fins for improved fluid coupling efficiency
  • Over Drive clutches 33% increase & 2C clutches 33% increase
  • Heavy duty cam & roller design low reverse one way clutch
  • Ideal replacement for stock torque converter
  • Lower rpm response than the stock converter
  • Great for street and towing applications
  • High performance Enhanced stall stator
  • Upgraded Governor Pressure Transducer
  • Custom Big Stack overdrive shaft
  • Torque Convertor Enhanced Stall
  • BD reinforced accumulator plate
  • New 4C billet spring retainer
  • No Shuttle Shifting Problems
  • Stamped Forged 1 Piece Cover
  • Upgraded Governor Solenoid
  • More Efficient Operation
  • Good for 550 flywheel HP
  • Damper springs replaced
  • 11.625 inch dual-clutch
  • No Race Abuse Covered
  • Upgraded Valve body
  • Furnace Brazed Fins
  • PROFORCE CONVERTER:
  • Aluminum HD Pan
  • TRANSMISSION:

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2013-2018 Ram 2500 Big Horn
2011-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2011-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2012-2016 Ram 2500 Outdoorsman
2011-2018 Ram 2500 SLT
2011-2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2011-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2011-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2011-2018 Ram 3500 SLT
2011-2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman

You may also like

-70%

Yukon Gear 1541H Alloy Rear Axle For 03+ 8.8in Ford Crown Victoria w/ Abs

$386.99

$116.10

Yukon Gear 1541H Alloy Rear Axle For GM 8.6in (99 -04 w/Disc Brake)

$371.99

Yukon Gear 1541H Alloy Rear Axle For 8.5in GM 2Wd C10 Truck

$314.99

-70%

Yukon Gear 1541H Alloy Rear Axle For 03+ 8.8in Ford Crown Victoria w/ Abs

$341.99

$102.60

-70%

Yukon Gear 1541H Alloy Rear Axle For 80-90 8.5in GM 4Wd Truck

$312.99

$93.90

Yukon Gear Axle For GM 8.6in / 07 Up Chevy / 4Wd Abs Axle Disc Brake 34.25in

$341.99

-70%

Yukon Gear Axle For 07 and Up 9.5in GM Axle / 34.02in

$428.99

$128.70

-70%

Yukon Gear 1541H Alloy 6 Lug Rear Axle For 70-81 GM 12T 4Wd

$299.99

$90.00

-70%

Yukon Gear Rear Axle For GM 11.5in (00+) w/ A Length Of 35.94in and 30 Splines

$465.99

$139.80

-70%

Yukon Gear Replacement Standard Open Carrier Case For Dana 30 / 3.73+ /Bare

$227.99

$68.40

-70%

Yukon Gear Replacement Standard Open Carrier Case For Dana 44 / 30 Spline / 3.92+ / Bare

$204.99

$61.50

Yukon Gear Replacement Standard Open Loaded Carrier For Liberty Dana 30 / 3.73+

$410.99